Viatec SmartPTO V3 Installation Manual (Rev 1.5)
The complete installation manual for the SmartPTO V3 (Rev 1.5) — for upfitters and installers. Covers uncrating, chassis preparation, hydraulic and electrical connections, system mounting, priming, and pre-operational checks. Download the PDF for use in the shop.
⬇ Download the SmartPTO V3 Installation Manual (PDF, Rev 1.5, 72 pages)
What's in the manual- Uncrating Your SmartPTO — removing crate panels, lifting the unit from the crate base, and inventorying the accessories box
- Installation Overview and Specifications — system dimensions and maximum weights, process map, integration overview, and the hydraulic and electrical interface overviews
- Chassis Preparation — mounting dimensions, bulkhead preparation, chassis modifications (drilling, B-channel mounting, cutouts, welding)
- Hydraulic System Connections — suction and pressure lines, return-to-tank line, and load-sense pressure sensor installation
- Electrical Harness Connections — 12V/24V export power, Main Control Panel, charge receptacle bracket and harness routing, CAN network / J1939 harness, and ignition harness
- System Mounting — connecting hydraulics and electrical harnesses at the SmartPTO bulkhead
- System Pre-Operational Checklist
- Hydraulic System Priming — purging the engine (pressure) side and the SmartPTO (pump) side
- System Operational Check
⚠️ Safety first: Installation involves high-voltage components and pressurized hydraulic circuits. Review the safety sections of the manual before starting, and ensure the vehicle is powered off and hydraulic circuits are fully de-pressurized before connecting lines.
Need help during an install?After installation: see the SmartPTO V3 Operation Manual for day-to-day operator guidance, or the SmartPTO V3 Quick Start Guide for the short version.
Contact Viatec Customer Service before proceeding if anything doesn’t match the manual — have the unit serial number and your chassis details ready.